Welcome to HardwareForumz.com!
FAQFAQ    SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

7NJL6 - which OS?

 
   Hardware Problem Solving Community! (Home) -> Chaintech RSS
Next:  A8N SLI Delux has issues with ATX 4 pin power con..  
Author Message
nthums1

External


Since: Aug 20, 2005
Posts: 13



(Msg. 1) Posted: Sat Aug 20, 2005 3:55 pm
Post subject: 7NJL6 - which OS?
Archived from groups: alt>comp>periphs>mainboard>chaintech (more info?)

Although I've had quirks, probably mostly Mr.Bill, I had what seemed a
pretty darned good system, except not getting USB2 to function at high
speed. This was under SE. Alas it went south before I got a recovery
setup and my main partition got really scrambled. Reason
undetermined.
I set up a new drive with ME and again most of my troubles seem
attributable to you know who. And again USB2 lacking its appropriate
speed.
Has anyone had success with 98SE or ME? Was it a clean install or MOBO
change (which mine was).
I contacted Chaintech concerning USB2 and was told to reset the CMOS,
start up in BIOS and choose optimal defaults.
I hadn't installed a floppy and that was the first thing it looked for
and locked. Restart and it installed a second grouping for the IDE
controller.
I went to safe mode and removed most of the stuff, all system, IDE,
& USB. Upon reboot in went to reinstalling and now I have a lot
of stuff installed twice. viewing devices by connection, some are
directly off the computer and other off the acpi bios. And still two
IDE controllers.
Can anyone tell me what a properly installed device manager screen
should look like?

 >> Stay informed about: 7NJL6 - which OS? 
Back to top
Login to vote
uddarts




Joined: Jun 15, 2005
Posts: 249



(Msg. 2) Posted: Sun Aug 21, 2005 5:05 am
Post subject: Re: 7NJL6 - which OS? [Login to view extended thread Info.]

what usb hardware are you using. i have a dual boot 98se and 2k on a 7njs which has the same chipset. i attached a wd 120 external usb/firewire to it and transfered 4 gig of mp3 files/folders. the 2k os was running about 5 min either direction. the 98se ran 6 min from the usb drive but fell flat on it's face from the internal sata drive doing the transfer in about 6 min.

i did a sandra 2004 file test both 98se and 2k showed 19meg transfer rate.


no answer but should give something to compare.


ud

 >> Stay informed about: 7NJL6 - which OS? 
Back to top
Login to vote
nthums1

External


Since: Aug 20, 2005
Posts: 13



(Msg. 3) Posted: Mon Aug 22, 2005 4:33 am
Post subject: Re: 7NJL6 - which OS? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Not the same chipset if you check closely.
running Iomega HDD.
 >> Stay informed about: 7NJL6 - which OS? 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
7NJL6 and Mobile XP - The 7NJL6 board isn't reading my 3000+ XP-M correctly. Looks like the bios doesn't support it. Is there a custom bios out there for XP-M chips?

7NJL6 Problem - I just bought the 7NJL6 and an AMD 2900+ processor. I installed everything from my old machine onto this new board and cpu. The machine will boot up, go through POST, will let me enter bios, will check everything and then ask how I want to load windows.....

SATA for 7NJL6? - I'm building an HTPC and considering SATA HDs in raid 0 configuration. Is this interface raliable on this board? -Zilla

Another 7NJL6 Problem - Hey guys and gals, I'm new here so bear with me please. Anyhow, my system specs are as follows 7NJL6 Mobo x2 512 ddr 400 ram strips AMD 3000+ cpu 450w psu geforce 6600 256ddr vid card WinXP SP2 OS Creative 5.1 sound (all peripheral drivers are up to..

DDR 3200 & 7NJL6- only 200Mhz??? - I just bought an Athlon XP 3000+ and was stoked b/c my ram (Kingmax DDR 3200) would run at 400mhz. However it apears that my ram is only running at 200Mhz. What is up with that? How can I get it to run at 400Mhz like it is supposed to?
   Hardware Problem Solving Community! (Home) -> Chaintech All times are: Pacific Time (US & Canada)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]